OCV3 Version 2 Window Regulator

OCV3 Version 2 Window Regulator

Electronic device designed to open or close air inlets / windows / dampers, etc.

Manages 3 OSMO lift motors.

Digital temperature probe included (1 per motor).

Motor 3 recommended for chimneys or ridge vents.

Multiprogram microcontroller (since July 2024).

Able to adapt to different types of installations.

---

Natural ventilation (With our digital temperature probe)

Temperature control from 0ºC to 85ºC with 1ºC hysteresis.

Easy programming and reading of limit switches and control and operating parameters:  temperature, battery voltage, window position, maximum opening and minimum closing, etc.

Fault detection system and parameter storage during power outages.

Programmable thermal jump detection (recommendation: NOT LESS THAN 2º).

– Motor 1 and 2: emergency priority command:  programmable window positioning with an external device and our auxiliary input.

In the absence of 230 V: we take control by temperature.

– Motor 3: recommended for chimneys or ridge vents.

In the absence of 230 V: two options, take control by temperature or emergency opening

---

Forced ventilation (in addition to the previous operation):

Motor 1 and 2:

– By adding our CVA* accessory (DP3 PROGRAM) and using the digital temperature probes already installed in our regulator, we activate the connection and disconnection of external devices for: ventilation, cooling, heating, or any type of device.

– Programmable emergency temperature.

Motor 3:

– Different operating possibilities. In the absence of 230 V, two options: take control by temperature or emergency opening.

---